Our own servers in Europe · GDPR · Support in your language

Module 7 of 7 · IATF 16949 · Clause 10

Improvement

The final clause requires continual improvement to be proven with data: falling PPM, falling complaints, falling cost of poor quality.

Content reviewed on

Nonconformity and corrective action

When an internal nonconformity or customer complaint occurs, apply the full 8D methodology: containment, root cause, action and verification.

Preventing recurrence

Extend the corrective action to similar processes and products to stop the same failure showing up on another line or project.

Continual improvement

Continual improvement of the manufacturing process demonstrated with indicators, not just declared in the quality manual.

What an auditor usually asks for

  • An 8D log with containment, root cause and effectiveness check
  • Evidence the corrective action was extended to similar processes
  • Continual-improvement indicators (PPM, cost of poor quality) trending down
  • A process improvement plan with concrete actions

How to cover improvement in Kimobox

  1. 1Open every nonconformity with the full 8D methodology built into the system.
  2. 2Extend the corrective action to similar processes with one click from the original record.
  3. 3Track the PPM and cost-of-poor-quality trend on the indicator dashboard.

Extending a corrective action to another line stays on record, with its own effectiveness check.

See nonconformities and corrective actions in Kimobox

IATF 16949 templates and records in this chapter